Most required texts and supplies may be purchased through the Georgia Tech bookstore.
If your lab course is not listed here please check the GT Bookstore for required texts or supplies.
Some supplies may be offered by the Georgia Tech Engineer’s Bookstore.
This list is NOT official – lab instructors have the final word. This list may NOT include all GT courses which may require supplies.
It is the student’s responsibility to have all texts, manuals, parts, or supplies that may be required BEFORE the first lab meeting.
Consult your instructor or current course syllabus to determine any EDITION or parts kit changes.
|
|
|
|
Text |
Rapid Prototyping
of Digital Systems, by James O. Hamblen and Michael D. Furman |
|
Lab
Manual |
ECE2031
Laboratory Manual, by Michael D. Furman, Tyson S. Hall, Thomas R. Collins,
and Christopher Twigg |
|
Supplemental
Texts |
Mayfield
Handbook of Technical and Scientific Writing, by Leslie C. Perelman, Edward
Barrett, and James Paradis |
|
Wire
Jumper Kit |
The Wire
Kit – The wires in this kit are pre-stripped and pre-bent for easy insertion
into the protoboard. |
|
Parts Kit |
2031 Chip
Set – A selection of chips to be used in various laboratory exercises |
|
|
|
|
|
|
|
Text |
none |
|
Lab
Manual |
Electrical
Measurements by Brewer |
|
Supplemental
Texts |
Schematic
Capture with Cadence PSPICE by Herniter and Mayfield
Handbook of Technical and Scientific Writing |
|
Parts Kit |
3041 Parts
Kit |
|
Protoboard |
Protoboard – This board will be used in this and other ECE labs. |
|
|
|
|
|
|
|
Text |
none |
|
Lab
Manual |
Experiments
in Modern Electronics by Leach |
|
Supplemental
Texts |
Schematic
Capture with Cadence PSPICE by Herniter and
Mayfield Handbook of Technical and Scientific Writing |
|
Parts Kit |
3042 Chip
and Parts Kit |
|
Protoboard |
Protoboard – This board will be used in this and other ECE labs. |
|
|
|
|
|
|
|
Text |
Course
Notes by Jerome Meisel. Available from the
Engineer’s Bookstore. |
|
Lab
Manual |
This course includes nine laboratory sessions designed to
illustrate the concepts presented in the lectures. The lab sessions start in the third week of
the semester. Please pay careful
attention to the Schedule to see when labs and lectures are scheduled. The ECE-3301 Lab Manual will be available
at the Engineers Bookstore during the second week of the semester. This Manual includes revisions made each
semester, so you are advised not to use a previous version. |
|
|
|
|
|
|
|
Text |
none |
|
Lab
Manual |
Experiments
in Analog and Digital Electronics by Brewer |
|
Supplemental
Texts |
none |
|
Wire
Jumper Kit |
The Wire
Kit – The wires in this kit are pre-stripped and pre-bent for easy insertion
into the protoboard. |
|
Parts Kit |
3741 Chip
and Parts Kit |
|
|
|
|
|
|
|
Supplemental
Text |
JETER,
WRITING STYLE+STAND.IN UNDERGRADUATE |
|
Lab
Manual |
Contact the lab instructor for instructions. |
Updated: January 4, 2007
Georgia Tech